The Zircon TriScanner OneStep finds the center of studs in one pass! Revolutionary CenterVision™ technology pinpoints the stud center, not just the edge. TriScanner® OneStep™ is a four-function scanner with the patented SpotLite® Pointing System and rubberized grip. TriScanner® OneStep™ finds the center and edges of studs and joists, finds copper (and other non-ferrous metal) pipes up to 1-1/2 inches (38 mm) deep, and finds rebar (ferrous metal) in concrete up to 3 inches (76 mm) deep, while continuously detecting hot unshielded AC wires.

Stud Scan Mode
TriScanner® OneStep™ finds the edges of studs and joists up to 3/4 inches (19 mm) deep in normal mode.

Stud DeepScan® Mode
In Zircon's patented DeepScan® mode, TriScanner OneStep™ can find studs up to 1-1/2 inches (38 mm) deep behind drywall, paneling, or plywood.

Metal Scan Mode
Finds copper and other non-ferrous metal up to 1-1/2 inches (38 mm) deep.
Finds ferrous metal such as rebar in concrete up to 3 inches (76 mm) deep.

AC WireWarning™
Continuously detects hot unshielded AC wiring—an important safety feature.

Key Features:

• Exclusive—finds the stud center
• Finds both wood and metal studs
• Constant hot AC WireWarning™ in all modes for safety
• Patented SpotLite® Pointing System
• Patented DeepScan® dual sensitivity scanning
• Metal scan for finding pipes, nails, rebar, and other hidden metals

Applications
 
   Find the center and edges of wood or metal studs or joists to:

• Hang cabinets, pictures, mirrors, and shelves securely Install ceiling fans, grab bars, and chandeliers
• Find metal pipes behind tile and in concrete
• Find conduit, rebar, electrical boxes, exhaust vents, and ducting
• Detect hot electricity behind walls, floors, and ceilings
• Avoid cutting or drilling into piping or electrical lines

The ZIRCON Advantage

• Patent-pending CenterVision™ technology finds the stud center in one step.
• Uses a patented sensor to pinpoint the center and edges of wood or metal studs behind walls, floors, or ceilings.
• Exclusive, patented SpotLite Pointing System shines a bright beam of light over target center.
• Metal-only setting looks specifically for metal pipes or rebar.
• AC WireWarning™ is active in all modes for safety.
• Patented dual-sensitivity scanning—normal up to 3/4 inch (19 mm) or DeepScan up to 1-1/2 inches (38 mm) — through drywall, paneling or plywood, or a combination of them, and through most bare wood flooring.

Technical Information:

• Dimensions 6.32 in. H x 3.13 in. W x 1.27 in. D  (161 mm x 80 mm x 32 mm)
• Weight 6.5 oz. (184 g) without battery
• Battery type 9-V alkaline (not included)
• Estimated battery life 2 years at 10 minutes per day with alkaline battery
• Position accuracy Stud Scan mode: typically within 1/8 in. using the dual scan and mark procedure
• DeepScan mode: typically within 3/16 in. using the same procedure
• Metal Scan mode: typically within 1/2 in. (13 mm)
• Detection Depth Up to 3/4 in. in Stud Scan mode
• Up to 1-1/2 in. in DeepScan mode
• Up to 1-1/2 in. for copper in Metal Scan mode
• Up to 3 in. for rebar in Metal Scan mode

NOTE: Sensing depth and edge detection can vary due to moisture content of materials, wall texture, paint, etc.
AC Position Accuracy Typically 90–250 V at 50–60 Hz laterally within 12 in. (150 mm) of a hot unshielded wire
AC Sensing Depth Typical depth of 2 in. (50 mm)
Operating temperature 20° to 120°F (-7° to 49°C)
Storage temperature -20° to 150°F (-29° to 66°C)
Humidity 80% RH (non condensing)
Water resistance Splash and water resistant, not waterproof



The First Tape Measure With a Built-In Digital Voice Recorder! Never forget another measurement! The age-old problem of forgetting measurements on the job site or around the house will soon be a distant memory. Zircon's Repeater 25 combines the rugged durability of a professional tape measure with a simple to operate digital voice recorder, allowing do-it-yourselfers and professionals to easily record multiple measurements as they work. Recordings can then be played back in sequential order whenever and wherever needed.

Separate record, playback and rewind buttons are ergonomically positioned on one side for single-handed operation, making Repeater extremely easy to use. The Repeater automatically adjusts volume (with advanced automatic gain control), making sure recordings are clear and audible even when made at noisy construction sites.

A solid state digital voice recorder and rugged product design assure durability even at the toughest job site. Repeater 25 can record up to 20 seconds of information. No more searching for pencils, pens or scratch pads! No need to rely on memory!

Repeater's rigid tape extends 7 feet (2 meters) without buckling, comes with a tough plastic outer casing and locking mechanism for tape control.

Neatly fits into standard size tape holders and tool belts.

LED stays on while recording.

The ZIRCON Advantage

• Never forget another measurement! Record measurements on the spot with built-in voice recorder.
• Stores 20 seconds of messages.
• Automatically adjusts voice for any distance up to 3 feet (1 meter).
• Easy to use: separate record, play and rewind buttons.
• Impact absorbing bumper protects claw.
• Includes belt clip.

Technical Information

• Dimensions 3.25 in. H x 3.10 in. W x 2.05 in. D
• Weight 13.3 oz (377 g) with battery
• Battery type Four LR44 - 1.5-Volt alkaline button cell (included)
• Estimated Battery Life 1500 5-second playbacks
• Microphone Sensitivity  62dB (+ 3dB)
• Frequency Response 50Hz - 5KHz
• Tape Width 1 in. (2.5 cm)
• Record Time 20 seconds
• Humidity 80% RH (non condensing)
• Water resistance Splash and water resistant, not waterproof

Package dimensions: 16 in Length X 14 in Wide X 12 in Depth
Weight: 6 lbs

Anywhere in the U.S.
Flat Rate Shipping : $12.99